Тепловентилятор BALLU BFH/W-201L

Электрический металлокерамический тепловентилятор  BALLU BFH/W-201L   благодаря настенному креплению, не занимает места в помещении

Удобный пульт ДУ в комплекте. Тепловентилятор оборудован термостатом, который автоматически поддерживает температуру воздуха в помещении в соответствии с заданным режимом.

Прибор  BALLU BFH/W-201L  – это высокотехнологичный тепловентилятор с электронным управлением и надежной передовой защитой от перегрева, предназначенный для обслуживания помещений с небольшой площадью до 25 м2. 

Отличительные особенности , помимо вышеуказанных

• информативный LED-дисплей;
• высоконадежный керамический нагревательный элемент мощностью 2 кВт;
• возможность точной установки температуры, до 1°С;
• термостат  автоматически поддерживает температуру воздуха в помещении в соответствии с заданным режимом.
• класс пылевлагозащищенности IP20.

Функциональные особенности

Уход за прибором

Уход за тепловентилятором не требует специальных навыков и больших затрат времени. Достаточно по мере загрязнения протирать корпус прибора сухой или увлажненной салфеткой, а воздухозаборную и воздуховыпускную решетки очищать от скопившейся в них пыли с помощью пылесоса. Перед началом очистки тепловентилятор необходимо отключить от электросети и дать ему остыть.

  Не рекомендуется использовать для ухода абразивные чистящие порошки, органические растворители и химические средства.

1. Power switch: There is a rectangular power switch on the back shell in the middle of the fuselage. Turn on the "1" position, press the power button, press the red "mountain" on the display screen, the white light on the digital screen is charged, and the screen displays the working status. 2. Adjust the temperature : Press to increase the temperature, press once to increase one degree, press, the arrow is to decrease. 3 Temperature, press once to decrease one degree (press the button to increase or decrease temperature continuously) The adjustment range is 5-45 degrees, when the set temperature is greater than The heater starts to work at room temperature, and the digital screen is the best indicator; when the set temperature is lower than room temperature, the heater changes from working to not working. The digital screen does not display music. 4. There are 2 working modes for heating: ①Speed ​​heating mode: power supply The machine runs at full power: ②Variable frequency mode: The power changes as the room temperature rises. The machine runs in the fast heating mode by default. If you want to switch to the high-speed mode, click "Change" to switch. The corresponding "close" and "y" lights are on. (The changing collar mode is related to the set temperature) 5. Timing shutdown: press the timing button once, and the digital screen "0° (the number of the purchase position) flashes. When flashing Press up or down to set the timer off time (1-24 hours in the range), when the timer off is set successfully, the back pattern will be on, and the heater will be turned off after the appointed time, and the back pattern will not be charged. The digital screen does not display (goes black). 6. Timing start: When the power switch is turned on and the screen is off, press the timing button on the remote control, the mouth pattern will light up, and the digital screen "00°" will flash. When it is flashing, turn it up or down to set the time for timing boot (The range is 1-24 hours). When the timing start is set successfully, the white solid case will light up, and the heater will turn on after the appointed time. 7. Child lock function: In the working mode, press "Army A" at the same time, and the digital screen will display There are three ways to unlock the child lock: 1. Automatic unlocking at the end of the timer; 2. Turn off the power switch, then turn it on again to unlock the system. 3. Click again on the machine or press the child lock button on the controller , "Day" does not light up. 8. Power-off memory function: When the heating is in the working state, turn off the power switch or power failure, the heater will be turned off, when the power switch is turned on and press the power button, the heater will be protected before it is turned off. 9. Screen off function: long press the power button for 3 seconds or more to display or turn off the screen (just turn off the screen and not turn off the machine) 10 .Switch on and off: Click the power button to turn off the heater, the indicator light at the power button turns red, and other lights go out; click the power button again to turn on the heater, and the corresponding indicator light is on. The L end is hot, the "L° light is on, and then click the gear button to switch to R to heat up, the "R' light is on, and then click the gear button, the L+R mouth is hot, and the "L" and "R" lights Light up at the same time, and then click the gear button to switch to the L end for heating, and so on. 12. When the machine is working and heating, if the left and right gears are switched, the heating element will stop heating immediately on the switched side, but the fan still needs to work after a delay 5 seconds: If the temperature exceeds the set temperature by 2 degrees under the changing collar or fast heating working state, the heating element will stop heating, and the fan will also delay working for 5 seconds. If you press the power button on the heater to turn it off, the fan will delay Work for 15 seconds, and at the same time there is a 15-second countdown display on the display.